Analisis Kesenjangan Penerapan ISO 45001:2018 pada Perusahaan Makanan Ringan
DOI:
https://doi.org/10.55448/ems.v3i1.46Keywords:
Analysis of preparation, Gap Analysis, ISO 45001:2018 ConformanceAbstract
Snack company is committed to implementing an occupational safety and health system (SMK3)based on ISO 45001:2018. Therefore, an analysis of the preparation of ISO 45001:2018 was carried out to determine the company's preparation in implementing ISO 45001:2018. The purpose of the research is to measure the efforts that have been designed and implement the SMK3 design based on ISO 45001:2018 carried out by snack company and measure the suitability of the initial conditions based on ISO 45001:2018. Data analysis was carried out using a Likert scale using the Spearman correlation test. The results of the fulfillment of SMK3 preparation based on ISO 45001:2018 obtained an Organizational Context clause of 50%, a Leadership, and Employee Participation clause 62.5%, a Planning clause 72.5%, a Support clause 89%, an Operational clause 73%, a Performance Evaluation clause 92% and an increase clause 87%. The results of the reliability test of the Cronbach Alpha value above 0.70, the Spearman correlation test with a significant value of 0.985. The conclusion that can be drawn is that the company for most or above 50% has implemented the ISO 45001:2018 scheme. The clauses that have been mostly implemented are planning, Support, Operations, Performance Evaluation, and Improvement Clauses. While the clauses that are not implemented are the clauses of Organizational Context and Leadership and employee Participation. In conformity with the preparation of ISO 45001:2018 with the initial conditions of the company, it shows a good condition of conformity, which is 73.33%.
References
Arikunto, S. 2012. Prosedur Penelitian Suatu Pendekatan Praktek. Jakarta: Rineka Cipta
David, W., dan Djamaris, A. R.A. 2018. Metode Statistik Untuk Ilmu dan Teknologi Pangan. Jakarta: Universitas Bakrie
Elphiana, G., Diah, M. Y., dan Zen, M. Kosasih. 2017. Pengaruh Keselamatan dan Kesehatan Kerja Terhadap Kinerja Karyawan PT. Pertamina EP Asset 2 Prabumulih. Jurnal Ilmiah Manajemen Bisnis Dan Terapan, 14 (2), 103-118
Ghozali, Imam. 2011. Aplikasi Analisis Multivariate Dengan Program IBM SPSS19, Semarang: Badan Penerbit Universitas Diponegoro
Madefri, R., dan Sukwika, T. 2021. Kajian Kompetensi Ahli K3 Terhadap Kinerja SMK3 pada PLTGU POMU Priuk. Jurnal Migasian, 5(2), 1-11
Masjuli, M. 2018. Akselerasi Sosialisasi ISO 45001:2018 Tentang Sistem Manajemen Keselamatan Kesehatan Kerja. Jurnal Migasian, 2(2), 19-24
Prastawal, H., Susanty, H., Purwaningsih, R., Susanto, N., dan Nugroho, S. 2018. Peningkatan Kapabilitas Penyusunan Dokumen Sistem Manajemen K3 Berdasarkan ISO 45001:2018 Di CV Javatech Agro Persada Pati. Departemen Teknik Industri: Universitas Diponegoro
Purwanto, A., Asbari, M., Novitasari, D., Fahmi, K., Mustofa, A., Rochmad, I., dan Wahyuni, I. S. 2021. Peningkatan Keselamatan Kerja Melalui Pelatihan ISO 45001: 2018 Sistem Manajemen Keselamatan dan Kesehatan Kerja Pada Industri Manufaktur di Tangerang. Journal of Community Service and Engagement, 1(2), 1-6.
Putri, M.D., Hartanto, M., dan Sari, Y. 2020. Perancangan Sistem Manajemen Keselamatan dan Kesehatan Kerja Berbasis ISO 45001:2018 Dengan Mempertimbangkan Kansei Engineering Di PT Dempo Laser Metalindo. Calyptra, 9 (1), 1-21
Rafsanjani, L.P., dan Rachmanto, T.A. 2021. Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja Klausul 8 ISO 45001:2018 Pada DIPO Lokomotif Sidotopo Surabaya dengan Metode FMEA. Jurnal Universitas Pembangunan Nasional Veteran, 2(1), 122-127
Sugiyono. 2012. Memahami Penelitian Kualitatif. Bandung: Alfabeta
Sujarweni, V. W., dan Utami, L. R. 2019. The master book of SPSS. Anak Hebat Indonesia.
Sukwika, T., dan Sutrisno, G. 2021. Kepemimpinan Keselamatan, Komitmen Ahli K3, Akuntabilitas Terhadap Kepuasan Kerja dan Kinerja Keselamatan. Jurnal Ecodemica Jurnal Ekonomi Manajemen dan Bisnis, 5(2), 164-174.
Susihono, W. (2013). Penerapan Sistem Manajemen K3 dan identifikasi potensi bahaya kerja (studi kasus di PT. LTX Kota Cilegon - Banten). Universitas Sultan Ageng Tirtayasa. Spektrum Industri, 2013, 11 (2), 117 – 242.
Syahrullah, Y., dan Febriyani, A. 2019. Evaluasi Standar Manajemen Kesehatan Dan Keselamatan Kerja Iso 45001:2018 Untuk Mencegah Terjadinya Kecelakaan Kerja Akibat Kegagalan Proyek Infrastruktur. Prosiding SNATIF Ke -6 Tahun 2019
Tarwaka. 2017. Manajemen Dan Implementasi Keselamatan Dan Kesehatan Kerja Di Tempat Kerja. Surakarta: Harapan Press.
Tjandra, F. 2019. Perancangan dan Implementasi Sistem Manajemne Keselamatan dan Kesehatan Kerja pada PT Korin Intiwira Sejahtera Sesuai ISO 45001:2018. (Skripsi), Surabaya: Universitas Surabaya.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Jurnal Ekologi, Masyarakat dan Sains

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors of articles published in Jurnal EMS are permitted to self-archive the published/PDF version anywhere.